================================================================== Olympus Lock - Architectural Specifications for National Keyway Locks Series 1 - National keyway ******** National keyway 4 or 5 pin door and drawer locks Item: Olympus 100DR (door) Item: Olympus 200DW (drawer) Door and drawer locks shall be easily rekeyable such as provided by Olympus Lock, Inc. (US Patent Nos. #4,899,563 and #4,920,774). All locks to include: working cylinder slides, forwardly removable cylinders for rekeying without totally disassembling lock body, and spacers as required for flush fit with outside face of casework material. Locks to have passed ANSI Grade 1 cycle testing. ******** National keyway 4 or 5 pin door and drawer latch locks ITEM: Olympus 999 (door) ITEM: Olympus 998 (drawer) Door and drawer latch locks shall be easily rekeyable such as provided by Olympus Lock, Inc. (US Patent Nos. #4,899,563, #4,920,774, other patents pending). All locks to include: working cylinder slides, forwardly removable cylinders for rekeying without totally disassembling lock body, four way reversible handings, and spacers as required for flush fit with outside face of casework material. ******** National keyway 4 or 5 pin sliding door lock Item: Olympus 300SD (sliding door lock) All sliding door locks to be easily rekeyable without removal from cabinet via a speed release mechanism such as provided by Olympus Lock, Inc. (US Patent Nos. #5,121,619 and #4,920,774). All plunger bolts to have built in bolt extension and strike locator. ******** National keyway 4 or 5 pin cam lock Item: Olympus DCN1 (fits 3/4" material) Item: Olympus DCN2 (fits 7/8" material) Item: Olympus DCN3 (fits 1-1/8" material) Item: Olympus DCN4 (fits 1-3/8" and 1-1/2" material) All cam locks to be easily rekeyable and field reversible such as provided by Olympus Lock, Inc. (US Patent Nos. #5,038,589 and #5,737,950). All cylinders to include a working top slide mechanism and retainer staple to permit easy rekeying and maintenance of lock. All cam locks will have a 1 inch face diameter and include an anti-rotation plate to trap the hex nut and prevent the lock from twisting in the hole. All cam locks to be field reversible such that one straight and one offset cam will provide all locking positions. ******** General specifications: All cabinet door, drawer, and sliding door locks shall be easily rekeyable such as manufactured by Olympus Lock, Inc. All locks will provide a set screw cylinder release system (US Patent #4,899,563) or speed-release cylinder removal system (US Patent #5,121,619) so easy access to the cylinder and cylinder housing can be gained by facility or locksmith personnel for servicing and rekeying. Only a similar patented system that provides working top slides for easy access to top springs and pins is acceptable. No crimping on top slides will be considered. Cylinder spacers will be provided to allow flush fit of lock cylinders on outside of cabinet material. All cam lock cylinders to include a working top slide mechanism and retainer staple to permit easy rekeying and maintenance of lock (US Patent #5,038,589). All cam locks will have a 1 inch face diameter and include an anti-rotation plate to trap the hex nut and prevent the lock from twisting in the hole. All cam locks to be field reversible such that one straight and one offset cam will provide all locking positions (US Patent #5,737,950). Finishes to be similar to BHMA standards for US3, US4, and US26D. No painted finishes will be acceptable. Key changes available: 4 pin = 650 key changes available with master key system 5 pin = 2,000 key changes available with master key system Note: Rekeyable cabinet locks must be capable of being rekeyed in 5 minutes or less when off the cabinet to qualify under this specification. ================================================================== Olympus Lock - Architectural Specifications for CCL Keyway Locks Series 2 - CCL keyway ******** CCL keyway 5 or 6 pin door and drawer locks Item: Olympus 500DR (door) Item: Olympus 600DW (drawer) Door and drawer locks shall be easily rekeyable such as provided by Olympus Lock, Inc. (US Patent Nos. #4,899,563 and #4,920,774). All locks to include: working cylinder slides, forwardly removable cylinders for rekeying without totally disassembling lock body, and spacers as required for flush fit with outside face of casework material. Locks to have passed ANSI Grade 1 cycle testing. ******** CCL keyway 5 or 6 pin door and drawer latch locks ITEM: Olympus 997 (door) ITEM: Olympus 996 (drawer) Door and drawer latch locks shall be easily rekeyable such as provided by Olympus Lock, Inc. (US Patent Nos. #4,899,563, #4,920,774, other patents pending). All locks to include: working cylinder slides, forwardly removable cylinders for rekeying without totally disassembling lock body, four way reversible handings, and spacers as required for flush fit with outside face of casework material. ******** CCL keyway 5 pin sliding door lock Item: Olympus 400SD (sliding door lock) All sliding door locks to be easily rekeyable without removal from cabinet via a speed release mechanism such as provided by Olympus Lock, Inc. (US Patent Nos. #5,121,619 and #4,920,774). All plunger bolts to have built in bolt extension and strike locator. ******** CCL keyway 5 or 6 pin cam lock Item: Olympus DCR1 (fits 3/4" material) Item: Olympus DCR2 (fits 7/8" material) Item: Olympus DCR3 (fits 1-1/8" material) Item: Olympus DCR4 (fits 1-3/8" and 1-1/2" material) All cam locks to be easily rekeyable and field reversible such as provided by Olympus Lock, Inc. (US Patent Nos. #5,038,589 and #5,737,950). All cylinders to include a working top slide mechanism and retainer staple to permit easy rekeying and maintenance of lock. All cam locks will have a 1 inch face diameter and include an anti-rotation plate to trap the hex nut and prevent the lock from twisting in the hole. All cam locks to be field reversible such that one straight and one offset cam will provide all locking positions. ******** General specifications: All cabinet door, drawer, and sliding door locks shall be easily rekeyable such as manufactured by Olympus Lock, Inc. All locks will provide a set screw cylinder release system (US Patent #4,899,563) or speed-release cylinder removal system (US Patent #5,121,619) so easy access to the cylinder and cylinder housing can be gained by facility or locksmith personnel for servicing and rekeying. Only a similar patented system that provides working top slides for easy access to top springs and pins is acceptable. No crimping on top slides will be considered. Cylinder spacers will be provided to allow flush fit of lock cylinders on outside of cabinet material. All cam lock cylinders to include a working top slide mechanism and retainer staple to permit easy rekeying and maintenance of lock (US Patent #5,038,589). All cam locks will have a 1 inch face diameter and include an anti-rotation plate to trap the hex nut and prevent the lock from twisting in the hole. All cam locks to be field reversible such that one straight and one offset cam will provide all locking positions (US Patent #5,737,950). Finishes to be similar to BHMA standards for US3, US4, and US26D. No painted finishes will be acceptable. Key changes available: 5 pin = 2,000 key changes available with master key system 6 pin = 4,000 key changes available with master key system Note: Rekeyable cabinet locks must be capable of being rekeyed in 5 minutes or less when off the cabinet to qualify under this specification. ================================================================== Olympus Lock - Architectural Specifications for Schlage Keyway Locks Series 3 - Schlage 'C' keyway ******** Schlage keyway 5 or 6 pin door and drawer locks Item: Olympus 700SC (door) / 800SC (drawer) Door and drawer locks shall be easily rekeyable such as provided by Olympus Lock, Inc. (US Patent Nos. #4,899,563 and #4,920,774). All locks to include: forwardly removable cylinders for rekeying without totally disassembling lock body and spacers as required for flush fit with outside face of casework material. ITEM: Olympus 850SC deadlocking drawer latch lock Drawer locks shall be easily rekeyable such as provided by Olympus Lock, Inc. (US Patent Nos. #4,899,563 and #4,920,774). All drawer latch locks to provide a deadlocking function such as provided by Olympus Lock, Inc. (US Patent No. #5,657,652). All locks to provide: forwardly removable cylinders for rekeying without totally disassembling lock body, and spacers as required for flush fit with outside face of casework material. General specifications All cabinet door, drawer, and sliding door locks shall be easily rekeyable such as manufactured by Olympus Lock, Inc. All locks will provide a set screw cylinder release system (US Patent #4,899,563) or speed-release cylinder removal system (US Patent #5,121,619) so easy access to the solid brass cylinder and cylinder housing can be gained by facility or locksmith personnel for servicing and rekeying. Only a similar patented system that provides working top slides for easy access to top springs and pins is acceptable. No crimping on top slides will be considered. Cylinder spacers will be provided to allow flush fit of lock cylinders on outside of cabinet material. Finishes to be similar to BHMA standards for US3 and US26D. No painted finishes will be acceptable. Key changes available: 5 pin = 2,000 keychanges available with master key system 6 pin = 4,000 keychanges available with master key system Note: Rekeyable cabinet locks must be capable of being rekeyed in 5 minutes or less when off the cabinet to qualify under this specification. ================================================================== Olympus Lock - Architectural Specifications for I.C. Core Lock Bodies ******** Series 4 - Interchangeable core cabinet lock bodies for Best/Arrow/Falcon or equivalent cores Item: Olympus 720 cam lock Item: Olympus 721DR door lock Item: Olympus 721DW drawer lock Item: Olympus 722S sliding door lock Item: Olympus 722S-KR sliding door lock - key retaining Item: Olympus 722S-TBM sliding door lock - through bolt mount Item: Olympus 725 door/drawer, rim/mortise, latch/deadbolt Item: Olympus 728MBL mail box lock Item: Olympus 950IC deadlocking latch lock ******** General specifications: All lock bodies to accept 6 or 7 pin interchangeable core cylinders as supplied by Best, Arrow, Falcon, KSP or other equivalents. All deadbolt or latch style locks to be non-handed and/or field reversible as provided by Olympus Lock, Inc. All deadbolt and latch locks to provide dedicated door and drawer functions in order to maintain keyway verticality when installed. All cam locks to be reversible between lost motion or key retaining. All bodies to be manufactured with disassembly/reassembly features to facilitate on-the-job maintenance. ******** Series 5 - Interchangeable core cabinet lock bodies for Corbin/Russwin IC cores Item: Olympus CR1125, door/drawer, rim/mortise, latch/deadbolt All lock bodies to accept 6 or 7 pin interchangeable core cylinders as supplied by Corbin/Russwin. All deadbolt or latch style locks to be non-handed and/or field reversible as provided by Olympus Lock, Inc. All deadbolt and latch locks to provide dedicated door and drawer functions in order to maintain keyway verticality when installed. All bodies to be manufactured with disassembly/reassembly features to facilitate on-the-job maintenance. Key changes available: 6 pin = 4,000 keychanges available with master key system 7 pin = 16,000 keychanges available with master key system ******** Series 6 - Interchangeable core lock bodies for Schlage large format IC cores 5 PIN - 2,000 key changes available master key system 6 PIN - 4,000 key changes available master key system ITEM: Olympus 777IC-DR deadbolt door lock ITEM: Olympus 777P-DR deadbolt door lock ITEM: Olympus 888IC-DW deadbolt drawer lock ITEM: Olympus 888P-DW deadbolt drawer lock All lock bodies to accept Schlage large format interchangeable core cylinders as supplied by Schlage Lock Company. All deadbolt locks to be non-handed and/or field reversible. All deadbolt locks to provide dedicated door and drawer functions in order to maintain keyway verticality when installed. All bodies to be manufactured with disassembly/reassembly features to facilitate on-the-job maintenance such as provided by Olympus Lock, Inc. ******** Series 7 - Interchangeable core cabinet lock bodies for Medeco/Yale IC cores Item: Olympus 931DR deadbolt door lock Item: Olympus 931DW deadbolt drawer lock All lock bodies to accept 6 pin interchangeable core cylinder #32-0201 as supplied by Medeco or 1210 Series IC cores as supplied by Yale Lock. All deadbolt locks to be non-handed as provided by Olympus Lock, Inc. All deadbolt and latch locks to provide dedicated door and drawer functions in order to maintain keyway verticality when installed. All bodies to be manufactured with disassembly/reassembly features to facilitate on-the-job maintenance. Key changes available: 6 pin = 4,000 keychanges available with master key system