CCL Keyway
5 PIN - 2,000 key changes available under a master key system
6 PIN - 4,000 key changes available under a master key system
OLYMPUS DEADBOLT
LOCKS
Olympus 500DR (door) - Olympus 600DW (drawer)
Cabinet locks: Provide Olympus 500DR (door) and Olympus 600DW (drawer)
easily rekeyable cabinet locks such as manufactured by Olympus Lock, Inc. All
locks to include: working cylinder slides and forwardly removable cylinders for
rekeying without totally disassembling lock body. Furnish 2 keys per lock and
bar or slotted strikes as required. Spacers to be provided as required for
flush fit with outside face of casework material. Locks shall be capable of
being keyed alike, keyed different and/or master keyed per supplied schedule. Locks
will have passed ANSI Grade 1 cycle testing.
OLYMPUS LATCH
LOCKS
Olympus 997R (RH-door) / 997L
(LH-door) - Olympus 996
(drawer)
Cabinet locks:
Provide Olympus 997 (door) and 996 (drawer) easily rekeyable latch locks such as manufactured by
Olympus Lock, Inc. All locks to include: working cylinder slides, forwardly
removable cylinders for rekeying without totally disassembling lock body and
four-way reversible handing. Keyway will remain in the vertical position
regardless of installation as a door or drawer. Spacers will be provided as
required for flush fit with outside face of casework material. Furnish 2 keys
per lock and lipped strike as required. Locks shall be capable of being keyed
alike, keyed different and/or master keyed per supplied schedule.
OLYMPUS SLIDING DOOR LOCK
Olympus 400SD (sliding door)
Cabinet locks:
Provide Olympus 400SD (sliding door) lock. Locks shall
be easily rekeyable without removal from cabinet via a speed release mechanism
such as manufactured by Olympus Lock, Inc. All locks to include: working cylinder slides, forwardly removable
cylinders for rekeying without totally disassembling lock body, built in bolt
extension and strike locator. Locks will include 2 keys per lock and
shall be capable of being keyed alike, keyed different and/or master keyed per
supplied schedule.
OLYMPUS CAM
LOCKS
Olympus DCR1, DCR2, DCR3, DCR4
Cabinet locks:
Provide Olympus DCR Series (cam lock). Cam locks to
be easily rekeyable and field reversible such as manufactured by Olympus Lock,
Inc. All cylinders to include a working top slide mechanism and retainer staple
to permit easy rekeying and field maintenance of lock. Cam
locks will have a 1 inch face diameter and include an anti-rotation plate to
trap the hex nut and prevent the lock from twisting in the hole. All cam locks
will be field reversible such that one straight and one offset cam will provide
all locking positions. Locks will include 2 keys per lock and shall be capable
of being keyed alike, keyed different and/or master keyed per supplied
schedule.
OLYMPUS DEADBOLT LOCKS
Olympus R078
(drawer)
Cabinet locks: Provide R078
(drawer) easily rekeyable cabinet locks such as manufactured by Olympus
Lock, Inc. All locks to include: working cylinder slides and forwardly
removable cylinders for rekeying without totally disassembling lock body.
Provide spacers as required for flush fit with outside face of casework
material. Locks will include 2 keys per lock and shall be capable of being
keyed alike, keyed different and/or master keyed per supplied schedule.
GENERAL SPECIFICATIONS
All cabinet door, drawer, and sliding door locks shall be easily
rekeyable such as manufactured by Olympus Lock, Inc. All locks will provide a
set screw cylinder release system (US Patent 4,899,563) or speed-release cylinder
removal system (US Patent 5,121,619) so easy access to the cylinder and
cylinder housing can be gained by facility or locksmith personnel for servicing
and rekeying. Only a similar patented system that provides working top slides
for easy access to top springs and pins is acceptable. No crimping on top
slides will be considered. Cylinder spacers will be provided to allow flush fit
of lock cylinders on outside of cabinet material. All cam lock cylinders to
include a working top slide mechanism and retainer staple to permit easy
rekeying and maintenance of lock (US Patent 5,038,589). All cam locks will have
a 1 inch face diameter and include an anti-rotation plate to trap the hex nut
and prevent the lock from twisting in the hole. All cam locks to be field
reversible such that one straight and one offset cam will provide all locking
positions (US Patent 5,737,950). Finishes will be
similar to BHMA standards for US3, US4, US26D and US10B. No painted finishes
will be acceptable.
Note: Rekeyable cabinet locks must be capable of being rekeyed in
5 minutes or less when off the cabinet to qualify under this specification.