HOME PRODUCTS DOCUMENTS INSTRUCTIONS IMAGES PROJECTS DISTRIBUTORS CONTACT

Reinforcing Trim Spacers and Templates
for through-bolt mounting Olympus cabinet locks
U.S. Patent No. D490,686 S

Reinforcing Trim Spacer
ETS1 Shown

  • Allows for proper mounting hole placement of external trim spacer
  • Through-bolt mount increases security of installation through reinforcement of cabinet face and direct connection of lock mounting screws to external
    reinforcing trim spacer's binder posts
  • Available in US3 and 26D finishes
  • Includes mounting screws
  • View product data sheet

 

Template for Reinforcing Trim Spacer
ETST1 Shown

  • External metal 1/4" reinforcing trim spacer allows for an attractive flush mounting of the cabinet lock face
  • Can be used as a 1/8" shim spacer
  • Available in US3 and 26D finishes
  • View product data sheet

 

 

Reinforcing Trim Spacer for 1-1/8" diameter cabinet locks

ETS1-125
1/8"Thick Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 700, 721, 754, 777, 800, 850, 854, 888, 950
  • 1/8" thickness
  • Works with our ETS1-PL Series cabinet pull
  • 26D or US3 finish

 

ETS1-250
1/4"Thick Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 700, 721, 754, 777, 800, 850, 854, 888, 950
  • 1/4" thickness
  • Works with our ETS1-PL Series cabinet pull
  • 26D or US3 finish

 

ETS1B
Reinforcing Trim Spacer

  • Blank reinforcing trim spacer
  • For use with 700, 721, 754, 777, 800, 850, 854, 888, 950 in conjunction with #2LPD-SP and #2LPD-KEPR strike assemblies
  • For use on pairs of doors when cabinet lock bolt locks behind dummy handle. Helps to hold cabinet lock bolt in place on pairs of doors with no central jamb.
  • Works with our ETS1-PL Series cabinet pull
  • 26D or US3 finish

 

ETS4
Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 777
  • 26D or US3 finish
  • Note: Use template #ETST1

 

ETS5
Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 888
  • 26D or US3 finish
  • Note: Use template #ETST1

 

ETST1
Template

  • Reinforcing trim spacer template for use with 700, 721, 754, 777, 800, 850, 854, 888, 950
  • Works with our ETS1-PL Series cabinet pull
  • 26D or US3 finish

 

 

Reinforcing Trim Spacer for 7/8" diameter cabinet locks

ETS2-125
1/8" Thick Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 100, 200, 500, 600
  • 1/8" thickness
  • Works with our ETS2-PL Series cabinet pull
  • 26D or US3 finish

 

ETS2-250
1/4" Thick Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 100, 200, 500, 600
  • 1/4" thickness
  • Works with our ETS2-PL Series cabinet pull
  • 26D or US3 finish

 

 

ETST2
Template

  • Reinforcing trim spacer template for use with 100, 200, 500, 600
  • 26D or US3 finish

ETS3
Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with N078, R078
  • 26D or US3 finish

 

ETST3
Template

  • Reinforcing trim spacer template for use with N078, R078
  • 26D or US3 finish

 

 

ETS6
Reinforcing Trim Spacer

  • Reinforcing trim spacer for use with 999, 998, 997 or 996 small pin latch locks
  • Includes both inside and outside pieces as shown at right
  • Inside piece rotates to correctly fit lock regardless of handing
  • 26D or US3 finish

 

Inside piece dimensions


 


Outside piece dimensions

ETST6
Template

  • Reinforcing trim spacer template for use with 999, 998, 997 or 996 small pin latch locks
  • 26D or US3 finish

 

 


Copyright © 2008 Olympus Lock, Inc. all rights reserved. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.